极乐视频

Helpful Links

For more information on the Portland Cement Association's Trowel Tips,

Jobsite Reminders for Best Color Uniformity

• Sample strips are not to be used for final color selection or approval. For final color approval, always build a sample panel in accordance with project specifications.
• Follow accepted, good masonry construction practices
• Use a clean masonry sand meeting ASTM C 144, which is consistent in color. Use sand from the same source throughout the project. Maintain the same mix proportions for each batch.
• Tool all joints when they reach the same degree of hardness.
• Protect all job site materials from the weather by covering with water-resistant materials
  Never re-temper colored mortar. Additional water will affect the final color.
• The use of admixtures is not recommended and may cause variations in the final color.
  Mix all materials 5 minutes in a mechanical mixer. Hand mixing will not fully develop the final color.

*Variations in job site mix proportions, temperature, moisture, sand, tooling and cleanup can cause inconsistencies in the color of the finished mortar.

Mixing Instructions

MASONRY AND PORTLAND & LIME BLENDS:
Each bag of Lehigh Masonry or Portland & Lime Blended Cement should be mixed with the appropriate volume of sand and water, as per ASTM C270.  Place approximately one-half the estimated amount of water into the mixer, followed by one-half of the sand, and all of the cement.  Add balance of sand and gradually add remaining water to obtain the desired working consistency.  Mix all material 5 minutes in a mechanical mixer.

PORTLAND CEMENT:
Proportion and mix according to project specifications.

COMPRESSIVE STRENGTH TESTING:
ASTM C270 is a laboratory specification utilizing a prescribed volume of water to evaluate the compressive strength of mortars. ASTM C780 is a field specification and should be utilized to evaluate mortars mixed in the field. Compressive strength results of field mortars utilizing ASTM C780 cannot be compared to the listed minimum compressive strength values given in Table 1 of ASTM C270.